A mobile phone chain is the must-have accessory of the moment. It is practical but also stylish. Wondering how to make your own phone chain for your mobile phone case? In this blog we tell you what you need and where to start. After reading this DIY blog, you can get started right away!
WHAT DO YOU NEED?
When making a mobile phone chain, you can choose from varied materials. For example, leather, acrylic or stainless steel. In this blog we opt for the latter, a mobile phone chain made of a stainless-steel link chain. In our range we have several types and sizes of link chains. To make a sturdy mobile phone chain, we recommend a chain with stronger links.
Another important part is a rivet with a ring for the phone case. The mobile phone chain is attached to the mobile phone case with this rivet. In our range, these rivets are available in gold or antique silver. Read on for a full rundown of all the requirements of this DIY blog.
What you need for your mobile phone chain:
- Phone case rivets with ring
- Golden link chain
- Jump rings 8 mm
- Punch pliers
- Flat nose pliers
- Mobile phone case
INSTRUCTION ON CREATING A PHONE CHAIN
STEP 1
We will start by attaching the rivets to the phone case. To do this, holes must be punched into the mobile phone case. The rivets have two screws, so two holes are needed for each one. We recommend that you first mark the position of the screws with a marker. Then take the punch pliers and choose the smallest hole size (2 mm). Place the cover on the perforated plate and punch two holes in the phone case by firmly squeezing the pliers.
STEP 2
Both screws can now be placed in the holes. Use a screwdriver to tighten the screws on the rivet. If you order punch pliers from us, you will receive a mini screwdriver as well as an additional punch plate. Very convenient!
STEP 3
After the rivet is rigidly connected to the phone case, the link chain can be attached. To do this, open a jump ring with two flat nose pliers. Place the link chain and the rivet ring in the jump ring and close it. Repeat this step for the other end of the link chain. Your mobile phone chain is ready!
The length of the link chain is up to you. You can opt for a short or long mobile phone chain. Bring the link chain to the desired length by opening a link with two flat nose pliers and shortening or lengthening the chain accordingly. If opening is not possible, you can also cut the links with side cutters.
CHOOSE YOUR STYLE AND START DESIGNING
Now you know how to make a mobile phone chain using a link chain. And yes, it is amazingly easy! Now that you know the basic steps, you can create diverse types of phone chains. According to your personal style. For example, make a mobile phone chain using a cord or a leather strap. Would you like to use different mobile phone chains quickly and easily? Then attach two lobster clasps to the ends of your phone chain. With the lobster clasps, you can quickly and easily attach your mobile phone chain to the rivets.
Determine your style and start designing a mobile phone chain!
DIY: PHONE CASE AND WRIST STRAP
Another popular mobile phone accessory is the wrist strap. The wrist strap is worn around the wrist and ensures a comfortable fit. How to make a wrist strap for a phone case? Watch the videos below for clear instructions. The wrist strap is similar to a phone chain as described in this blog; however, it is slightly different. What do you like better? A wrist strap with a link chain or beads?
